Exposed wall faucet for opening and closing water flow through a pipe, e.g. for a washing machine or connected tube. The square design for basin mixer
|Body Material||Solid Brass (Cu>59%,Pb<1.8%,Fe<0.3%),high Cu,low Pb.|
|Handle Material||Metal or plastic|
|Surface Treatment||Chrome plated|
Zinc and Brass angle valve
1) Chrome plated finish
2) ISO228 thread
3) OEM service
4) Size:1/2" ,3/4",3/8"...
1. Nominal pressure:1.0MPa
2. Working temperature:-10~110°C
3. ISO228 thread screw
4. Size:1/2"*3/8" or 1/2" or 3/4"
1. 100% pieces leaking tight test before shipment;
2. Forged brass body, nickel plated;
3. Most produced item, sample always available;
4. 22 years of design & manufacturing experience, 15 years of exporting experience, well-equipped Test & Inpsection laboratory.
In our own CNAS laboratory, we normally do the
1. life test
3. Apprearance testing
4. Leakage testing
If you have some specific test we also can do it for you.
1:The production follow the valve standard strictly. Toyota Lean Production line used by AQUA-MIGEN aim to improve the quality.
We test each piece valve during the production, quality control in forge, machine, assemble and all the process in order to guarantee the quality.
2:AQUA-MIGEN replace automatic machine to most old type of machine so as to make the products best
3：Automatic forging machine
1/ Rapid response:
Any of your questions will be answered within 24 hours.
2/ Quality Control:
All products must through double checks during every manufacturing process.
Test reports are available for each delivery.
Requirement of customers & quality of products will be full guaranteed.
Every defective product during the transportation can be compensated in the next order.
Samples are available. The samples shipment charge will be paid by your side