0086 13915563554 Email us:stevencao@cmecsz.com

How do ball valves work?

Views: 417 Author: Site Editor Publish Time: Origin: Site

A  ball valve, as its name neatly suggests, is any valve that utilizes a ball to control the flow of substances from one opening to the next.  The center of the ball includes a port, sometimes called a bore.  The ball valve is in the open position when this central port is aligned up in the same direction as the connected pipeline as such a positioning allows the fluid or gas to flow through. The ball valve turns to the closed position when the port becomes perpendicular, blocking the flow path and preventing any substances to continue moving through.

While most standard  ball valves are designed with special stop measures that permit only a 90 degree rotation, there are a few that offer a full 360 degrees.The 90 degree rotation is technically all that's required for the opening and closing of ball valves, but there are some applications where it's more desirable to have the full movement of the core. The ball valve is a notable industrial choice thanks to its reliable and air-tight sealing when in the closed position.This makes them particularly ideal for industries carrying potent chemicals or gasses that require secure and speeding shutoff, such as with natural gas. However, they shouldn't be used in intense throttling-like applications where constant wear on their seats could compromise their integrity.


There are three primary types of ball valves that are described by the ball's movement:

1.Trunnion Mounted Ball Valve - This type of ball valve includes an extra mechanical anchoring system at its top and bottom that makes it more suitable for use where there are higher pressures involved.  That's because the included trunnion mounted stem absorbs extra thrust or pressure from the pipeline and prevents any excess friction that would otherwise impact operations and reduce working life.


2.Floating Ball Valve - Floating ball valves don't have the added steading component of the trunnion and are instead connected only to the stem.  This gives floating ball valves their name as this causes the ball to 'float' downstream of the flow so that it presses against the seat to creating its own seal.


3.Rising Ball Valve - This genre of ball valves uses a tilt-and-turn process to reduce the opportunity for seal rubbing -- seal rubbing is one of the leading factors of premature valve failure.  When the valve is turned to the closed position, the core wedges against its seating for full shutoff.  When the valve is turned to the open position, that center core tilts away from the seal to allow the liquid or gas flow to pass uniformly across.